JAKE 600

The JAKE 600 has been designed for flange fastened cranes with gross lift moment up to 60 kNm and outreach max. 7,5 metres. The JAKE 600 also suits light harvester, felling head and crusher use. For bigger cranes or heavier implements, the choice is a JAKE 800 or JAKE 800 Tilt.

JAKE 600, brochure (pdf)
JAKE Selection table (pdf)
Disconnecting crane from tractor
JAKE 600, photo album

JAKE_600.jpg

Compared to a trailer-mounted crane the JAKE 600 increases the payload of the trailer as the weight of the crane is not on the load but on the tractor, increasing pulling power of the tractor as well. The tractor equipped with a JAKE Boom Support gains the pulling power even more by sharing the crane weight partly onto the front wheels.

The JAKE 600 makes using the crane versatile as the crane mounted on the tractor can be combined with other devices and equipment connected to a 3-point linkage and a trailer hitch usually with no limits.

Choose JAKE 804 for Valtra N4 and T4.