Valtra N1 HiTech and Advance

JAKE Mounting kit, 3D-picture (pdf)
JAKE Mounting kit when front loader, 3D-picture (pdf)
JAKE Mounting kit when JAKE Forest Tank, 3D-picture (pdf)
JAKE Mounting kit when JAKE Forest Tank + JAKE Axle Stabilizer, 3D-picture (pdf)

Plastic tank's front fastening when axle stabilizer or front linkage (pdf)

Advance filters and brake valve, 3D-picture (pdf)
Advance filters when only JAKE Aid Frame, 3D-picture (pdf)

HiTech filters, 3D-picture (pdf)
HiTech filters + brake valve, 3D-picture (pdf)
HiTech filters + priority valve, 3D-picture (pdf)
HiTech filters + brake valve + priority valve, 3D-picture (pdf)

Front suspension accumulators (pdf)

Compressed Air set in HiTech (pdf)
Compressed Air set in Advance (pdf)


Cabin fastening when not cabin suspension

Cabin's rear fastening (pdf)

valtra_n_cabin_fastening_1.jpg

valtra_n_cabin_fastening_2.jpg

Check the fit of JAKE Sleeve Unit and if necessary,  cut the cabin fastener before mounting a sleeve unit. All cabin versions don't need this cutting.


Cabin fastening when cabin suspension

Printable guide 1 (pdf)
Printable guide 2 (pdf)

Make sure the rear rim doesn't touch the spring or its fasteners when the cab is in the upper position. Use the limiters delivered with the JAKE when needed.

valtra_n_cabin_suspension_fastening_1.jpg

valtra_n_cabin_suspension_fastening_2.jpg

Cut off the upper and lower spring ears. Check the fit of the filter fastener.





Hydraulic trailer brake valve

valtra_n_brake_valve_1.jpg

Move the brake valve behind the rear axle by the fasteners delivered with JAKE. Don't open the brake fluid tubes, only bend them carefully. Metallic hydraulic tubes will be replaced by rubber hoses delivered with JAKE.


HiTech oil filters

valtra_n1x1h_filters_2.jpg

Move upper the two filters behind the rear axle by the fasteners delivered with JAKE. Also one fastener for a steel cable comes with JAKE. Metallic hydraulic tubes will be replaced by rubber hoses delivered with JAKE.


Advance oil filters

valtra_n1x1a_filters_4.jpg

Move a little the two filters behind the battery box. Also move the third filter from behind the rear axle to the two filters behind the battery box. Necessary fasteners will be delivered with JAKE. Metallic hydraulic tubes will be replaced by rubber hoses delivered with JAKE.



Advance oil filters when compressed air tank

valtra_n1x1a_filters_3.jpg

valtra_n1x1a_filters_2.jpg

valtra_n1x1a_filters_1.jpg

Move the two filters from behind the battery box to behind the right rear axle and the third filter to behind the left rear axle. Necessary fasteners will be delivered with JAKE as well as one steel cable fastener too. Metallic hydraulic tubes will be replaced by rubber hoses delivered with JAKE.